Direct answer: For stretch film, match width, gauge, roll length, film type, hand or machine workflow, core fit, and rolls per case.
Stretch film should be bought by the load problem, not just by the roll. A pallet with sharp corners, uneven freight, or heavy movement may need a different gauge or film type than a stable light load.
Stretch film exact-spec fields
| Primary spec | Width x gauge x roll length |
|---|---|
| Workflow | Hand stretch film or machine stretch film |
| Film type | Blown, cast, pre-stretched, or specialty film |
| Quantity | Rolls per case |
| Example SKU | SF188 - 18 in x 80 gauge x 1500 ft blown hand stretch film, 4/case |
Use Cases
- Warehouse pallet wrapping
- Mixed-SKU loads with uneven edges
- Manual hand-wrap stations
- Shipping and storage where load containment matters
Exact-Spec Checks Before You Buy
- Confirm hand film versus machine film before buying.
- Use gauge and film type to match load weight and edge risk.
- Confirm roll width and case count for pack-station storage.
- Compare nearby gauges when loads are tearing film or wasting excess wrap.
Packrift Products and Resources
- SF188 - 18 in x 80 gauge blown hand stretch film
- Stretch film by width, gauge, and core
- Packing and shipping supplies
Related Buying Guides
FAQ
What does stretch film gauge mean?
Gauge is a thickness indicator. Higher-gauge films are generally thicker and can support tougher loads, but film type and application also matter.
What is the difference between hand and machine stretch film?
Hand film is applied manually at a pack station. Machine film is made for stretch-wrap equipment and should match the machine setup.
When should I change gauge?
Move up or down in gauge when loads tear film, use too much wrap, or do not stay stable through shipping and storage.