Anti-Slip Paper Interface or Corrugated Layer Pad?
Name the function of a layer before selecting its material. A treated paper sheet at a contact interface and a corrugated board separator are different constructions. The fact that both arrive as flat sheets does not make one a substitute for the other.
Compare construction rather than the word sheet
KAS4840 is listed as 40 x 48 inch anti-slip pallet paper made from 80# kraft material with a non-slip treatment. It is supplied as 100 sheets per case. SP2436TW is a 24 x 36 inch kraft triple-wall corrugated sheet with an ECT-90 designation, supplied in bundles of five.
The products have different dimensions as well as different constructions. They are examples of distinct material roles, not an equal-size shortlist. The KAS4840 description does not provide a coefficient of friction for a specified pair of surfaces. The ECT-90 designation does not provide an allowable load or unsupported-span rating for an assembled layer.
| Component | Documented distinction | What to locate |
|---|---|---|
| KAS4840 | Treated kraft paper sheet | The intended contact interface |
| SP2436TW | Triple-wall corrugated board | The intended separator-panel position |
Identify both sides of the interface
For a hypothetical layered load, draw the material directly beneath and directly above the treated paper. Changing either neighboring surface changes the interface being evaluated. A record saying only “anti-slip sheet between layers” can hide whether the paper contacts cartons, a board pad or another material.
Draw the corrugated separator independently, including the area supporting it. If the design contains both materials, preserve two material lines and their order. Removing one because the other already covers the same area changes the construction.
Keep treatment and board rating separate
Do not infer a non-slip treatment from a corrugated sheet's ECT designation. Likewise, an anti-slip paper description does not identify triple-wall board construction. Each requirement needs its own stated product evidence.
The completed load may also have a separately specified restraint arrangement. A treated interface or a layer pad should not silently replace that arrangement. Their product descriptions do not establish that an unspecified assembled load is restrained for a particular movement.
Record a position, not just a purchase quantity
Keep the selected SKU, layer order and adjoining materials on the packing drawing. When a carton surface, support or separator changes, review the affected interface rather than assuming that the same sheet performs identically in the new arrangement. That produces a meaningful material specification before case and bundle quantities are calculated.
Review KAS4840, SP2436TW for the exact product descriptions and order units. Use Corrugated 24 x 36 corrugated sheets for related options. Keep the selected SKU with the complete packing instruction when ordering again.